List of Published Papers

Selected and English Translation Paper of IEEJ Trans. IA

Yutaro Tashiro, and Hitoshi Haga,
``Improvement of Light-Load Efficiency by using a Six-Arm Converter with Series-Parallel Switching,''
IEEJ J. Industry Applications, vol. 10, no. 2, pp. 273--281, 2021.
Shinichi Furutani, Akira Satake, and Takashi Hozuki,
``Inverter Dead Time Compensation Method using On-Line tuning,''
IEEJ J. Industry Applications, vol. 10, no. 2, pp. 264--272, 2021.
Yuki Ishikura, Tatsuya Hosotani, and Masayoshi Yamamoto,
``Bidirectional Converter with Multi-stage FETs Featuring Voltage Balance Control Function Using Variable Capacitors,''
IEEJ J. Industry Applications, vol. 10, no. 1, pp. 100--106, 2021.
Yuji Enomoto, Minori Nagata, and Takao Imagawa,
``Distributed Winding IPM Motor using Amorphous Metal Teeth,''
IEEJ J. Industry Applications, vol. 10, no. 1, pp. 107--113, 2021.
CKazuaki Tesaki, Yuji Ishida, and Makoto Hagiwara,
``Control and Experimental Verification of a Bidirectional Non-isolated DC-DC Converter Based on Three-level Flying-Capacitor Converters,''
IEEJ J. Industry Applications, vol. 10, no. 1, pp. 114--123, 2021.
Yugo Tadano, Takashi Yamaguchi, Takao Akiyama, and Masakatsu Nomura,
``Engine Torque Simulated Vibration Control for Drive Train Bench System Using Generalized Periodic Disturbance Observer,''
IEEJ J. Industry Applications, vol. 9, no. 5, pp. 618--628, 2020.
Tung-Hai Chin,
``Establishment of Theory of Power Conversion by Circuit Switching,''
IEEJ J. Industry Applications, vol. 9, no. 5, pp. 607--617, 2020.
Satoshi Ojika, Tomokazu Sakashita, and Shinichiro Oikawa
``Transient Response Improvement and Reduced Heat Generation Control for Satellite Bus Voltage Controller,''
IEEJ J. Industry Applications, vol. 9, no. 4, pp. 468--474, 2020.
Daisuke Matsuka, and Masahiro Mimura
``Surveillance System for Multiple Moving Objects,''
IEEJ J. Industry Applications, vol. 9, no. 4, pp. 460--467, 2020.
Yasufumi Yoshiura, Yusuke Asai, and Yasuhiko Kaku,
``Anti-resonance Vibration Suppression Control in Full-closed Control System,''
IEEJ J. Industry Applications, vol. 9, no. 3, pp. 311--317, 2020.
Junki Yoshimoto and Tetsuya Matsuyama,
``Simple Position Sensorless Speed Control Method for Permanent Magnet Synchronous Motors Using Flux Vector Control,''
IEEJ J. Industry Applications, vol. 9, no. 3, pp. 305--310, 2020.
Shumpei Hayashi, Hiroshi Hashimoto, Takashi Tokuyama, Takuya Matsumoto, and Tsuyoshi Miyazaki,
``Improvement of Electric Motor Thrust by Three-Dimensional Magnetic Pole Structure,''
IEEJ J. Industry Applications, vol. 9, no. 2, pp. 201--207, 2020.
Shoichiro Watanabe, Yasuhiro Sato, Takafumi Koseki, Takeshi Mizuma, Ryuji Tanaka, Yoshihiro Miyaji, and Eisuke Isobe,
``Verification of Optimized Energy-Saving Train Scheduling Utilizing Automatic Train Operation System,''
IEEJ J. Industry Applications, vol. 9, no. 2, pp. 193--200, 2020.
Hiroyasu Kobayashi, Natsuki Kawagoe, Keiichiro Kondo, Tetsuya Iwasaki, and Akihiro Tsumura,
``Method to Design Control System of Traction Inverter of DC-electrified Railway Vehicle for an Increase in Regenerative Brake Power,''
IEEJ J. Industry Applications, vol. 9, no. 1, pp. 92--101, 2020.
Yuji Enomoto, Kenta Deguchi, and Takao Imagawa,
``Development of an Ultimate-high-efficiency Motor by utilizing High-Bs Nanocrystalline Alloy,''
IEEJ J. Industry Applications, vol. 9, no. 1, pp. 102--108, 2020.
Katsutoku Takeuchi and Makoto Matsushita
``Considerations on Torque and Power Factor Characteristics of Synchronous Reluctance Machines Based on Their Magnetic Energy Properties,''
IEEJ J. Industry Applications, vol. 8, no. 5, pp. 857--866, 2019.
Sari Maekawa, Mariko Sugimoto, Keiichi Ishida, Masaya Nogi,and Masaki Kanamori,
``Stability Analysis of Sensorless Speed Control for PMSM Considered Current Control System,''
IEEJ J. Industry Applications, vol. 8, no. 4, pp. 736--744, 2019.
Yoshifumi Aoki, Hiromichi Ito, Chuzo Ninagawa, Junji Morikawa, Takashi Inaba, and Seiji Kondo,
``Complex Coordination Control with Entire Power Limitation and Partial Temperature Priority of Building-Multi Air-conditioning Facilities for Real-Time Pricing,''
IEEJ J. Industry Applications, vol. 8, no. 3, pp. 566--575, 2019.
Ryoichi Takahata, Shinichi Wakui, Kenji Miyata, Keiji Noma, and Masaharu Senoo,
``Influence of Rotor Eccentricity on Vibration Characteristics of Permanent Magnet Synchronous Motor,''
IEEJ J. Industry Applications, vol. 8, no. 3, pp. 558--565, 2019.
Kenji Yamamoto, Richard Lum, and Hisashi Takahashi,
``A Completely Capacitor-less, LED-switching Offline Lighting System,''
IEEJ J. Industry Applications, vol. 8, no. 2, pp. 379--385, 2019.
Akiyoshi Yamamura, and Norio Tomii,
``Indices for Delay Reduction Measures based on Analysis of Historical Train Traffic Records in Dense Railway Networks,''
IEEJ J. Industry Applications, vol. 8, no. 2, pp. 370--378, 2019.
Kazuhiro Shirakawa, Kazuyoshi Obayashi, Hiroshi Taki, Masami Fujitsuna, and Toshihisa Shimizu,
``Z-matched Active Common-mode Canceller for the Suppression of Common-mode Current in an Inverter System,''
IEEJ J. Industry Applications, vol. 8, no. 1, pp. 142--151, 2019.
Makoto Ito, Shinji Sugimoto, Akeshi Takahashi, & Shuichi Tamiya,
``A Narrow Bridge Structure for Reduction of the Flux Leakage,''
IEEJ J. Industry Applications, vol. 7, no. 6, pp. 517--524, 2018.
Ben Liu, Teruo Yoshino, and Atsuo Kawamura,
``Seamless Control of Grid-Connected Inverter during Single Phase Disconnection after Single Phase Fault in a Weak Grid,''
IEEJ J. Industry Applications, vol. 7, no. 6, pp. 506--516, 2018.
Akeshi Takahashi, and Wataru Hatsuse,
``Novel Criteria for Reluctance Torque Utility of Permanent Magnet Motors,'' ,
IEEJ J. Industry Applications, vol. 7, no. 5, pp. 445--453, 2018.
Makoto Kanemaru, Mitsuru Tsukima, Toshihiko Miyauchi, and Kazufumi Hayashi,
``Bearing Fault Detection in Induction Machine Based on Stator Current Spectrum Monitoring,'' ,
IEEJ J. Industry Applications, vol. 7, no. 3, pp. 282--288, 2018.
Mai Uenaka, Yuya Tanaka, and Akinu Nakabayashi ,
``Design Approach of Non-Isolated Converters with Passive Soft Switching,''
IEEJ J. Industry Applications, vol. 7, no. 4, pp. 371--377, 2018.
Makoto Kanemaru, Mitsuru Tsukima, Toshihiko Miyauchi, and Kazufumi Hayashi,
``Bearing Fault Detection in Induction Machine Based on Stator Current Spectrum Monitoring,'' ,
IEEJ J. Industry Applications, vol. 7, no. 3, pp. 282--288, 2018.
Masahiro Aoyama, Kazukiyo Nakajima, and Toshihiko Noguchi,
``Proposal and Preliminary Experimental Verification of Electrically Reversal Magnetic Pole Type Variable Magnetic Flux PM Motor,'' ,
IEEJ J. Industry Applications, vol. 7, no. 3, pp. 270--281, 2018.
Hiromu Norizuki, and Yutaka Uchimura,
``Contact Prediction Control for a Teleoperation System with Time Delay,'' ,
IEEJ J. Industry Applications, vol. 7, no. 1, pp. 102--108, 2018.
Wataru Ohnishi, and Hiroshi Fujimoto,
``Perfect Tracking Control Method by Multirate Feedforward and State Trajectory Generation based on Time Axis Reversal,'' ,
IEEJ J. Industry Applications, vol. 7, no. 1, pp. 93--101, 2018.
Keisuke Kusaka, and Jun-ichi Itoh,
``Development Trends of Inductive Power Transfer Systems Utilizing Electromagnetic Induction with Focus on Transmission Frequency and Transmission Power,'' ,
IEEJ J. Industry Applications, vol. 6, no. 5, pp. 328--339, 2017.
Koichiro Iwaoka, and Yuzo Hirotsu,
``Failure Detection Method using Aggregated Vehicle Detector Data,'' ,
IEEJ J. Industry Applications, vol. 6, no. 4, pp. 295--302, 2017.