List of Published Papers

Electric Machine, Motor Drive and their Applications (D8)

Naoki Kawamura, Tadanao Zanma, Kenta Koiwa, Kang-Zhi Liu, and Masaru Hasegawa,
``Position Sensorless Adaptive Positioning Servo System with Simplified Differential Calculation and High-Frequency Voltage Injection Strategy Considering Acoustic Noise Suppression,''
IEEJ J. Industry Applications, vol. 10, no. 1, pp. 1--10, 2021.
Takashi Suzuki, Hiroyasu Otake, and Shinji Doki,
``Maximum Torque Minimum Peak Phase Current of a Dual Winding Interior Permanent Magnet Synchronous Motor,''
IEEJ J. Industry Applications, vol. 10, no. 1, pp. 11--17, 2021.
Shinya Morimoto, Keita Shimamoto, Masanobu Kakihara, and Tsuyoshi Hanamoto,
``Improving Position Estimation Accuracy of Magnetic Saliency Based Sensorless Control by Considering Cross-Coupling Factor,''
IEEJ J. Industry Applications, vol. 10, no. 1, pp. 18--26, 2021.
Yuki Hidaka, Haruyuki Kometani, Toshiyuki Yoshizawa, and Masahiko Fujita,
``Mathematical-model-based Simulation of an Automotive Alternator Considering the Operation of a Rectifying Circuit,''
IEEJ J. Industry Applications, vol. 10, no. 1, pp. 62--68, 2021.
Arata Takahashi, Kazuya Ito, Kantaro Yoshimoto, and Tomoki Yokoyama,
``Experimental Verification of 2-Degree-of-Freedom Deadbeat Control with Disturbance Compensation for PMSM Drive System Using FPGA,''
IEEJ J. Industry Applications, vol. 10, no. 1, pp. 76--83, 2021.
Shohei Fujikura, and Yuki Hidaka
``A Novel Rotor Structure of Claw-pole Motor Designed by Magnetomotive Force-based Simulation Method,''
IEEJ J. Industry Applications, vol. 9, no. 6, pp. 685--690, 2020.
Sungyong Shin, Hikaru Naruse, Takashi Kosaka, and Nobuyuki Matsui
``Torque Ripple Minimization Control in SRM Based on Magnetizing Curve Model Considering Mutual Coupling,''
IEEJ J. Industry Applications, vol. 9, no. 6, pp. 637--649, 2020.
Tsutomu Miyauchi, Motonari Suzuki, Tetsuya Kato, and Hirotaka Takahashi,
``Improvement of DC Railway Simulation Using Iteration History-of-Convergence Calculation,''
IEEJ J. Industry Applications, vol. 9, no. 5, pp. 486--496, 2020.
Kenji Sato, Hirokazu Kato, and Takafumi Fukushima
``Development of SiC Applied Traction System for Next-Generation Shinkansen High-Speed Trains,''
IEEJ J. Industry Applications, vol. 9, no. 4, pp. 453--459, 2020.
Yuto Mitsui, Salman Ahmed, Yasuaki Aoyama, and Takafumi Koseki
``Detent Force Reduction by Positional Shifting of Permanent Magnets for a PMLSM Without Compromising Thrust,''
IEEJ J. Industry Applications, vol. 9, no. 4, pp. 376--383, 2020.
Chaodong Jiang, Jun Yang, Shihua Li, Mengdi Zhou, and Kaifeng Yang
``Friction-Compensation and Extended State Observer Based Model Predictive Control for PMSM Servo Systems,''
IEEJ J. Industry Applications, vol. 9, no. 4, pp. 351--357, 2020.
Hiroki Iwata, Kiyoshi Ohishi, Yuki Yokokura, Yuji Okada, Yuji Ide, Daigo Kuraishi, and Akihiko Takahashi
``Robust Estimation Method for Stator Temperature Based on Voltage Disturbance Observer Autotuning Resistance for SPMSM,''
IEEJ J. Industry Applications, vol. 9, no. 4, pp. 341--350, 2020.
Kenshi Matsuo, Takeshi Miura, and Katsubumi Tajima,
``Vibration Reduction of a Stepping Motor Using a Pre-compensator to Remove Control Delay,''
IEEJ J. Industry Applications, vol. 9, no. 2, pp. 191--192, 2020.
Yoshiyuki Hatta, and Tomoyuki Shimono,
``Analysis and Experimental Verification of Cross-coupled 2-DOF SPM Motor with Halbach Array,''
IEEJ J. Industry Applications, vol. 9, no. 2, pp. 177--190, 2020.
Satoshi Isaka and Toshiya Yoshida,
``Improving the Starting Characteristics of Single-Phase Induction Motors with an Auxiliary-Winding Current Control,''
IEEJ J. Industry Applications, vol. 9, no. 1, pp. 11--16, 2020.
Yushi Araki, Kodai Abe, Kiyoshi Ohishi, Yuki Yokokura, Junichi Sano, Koji Kobayashi, and Tatsuki Kashihara,
``Harmonic Current Reduction Control Based on Model Predictive Direct Current Control of IPMSM and Input Grid Circuit,''
IEEJ J. Industry Applications, vol. 9, no. 1, pp. 17--26, 2020.
Akihito Mizukoshi and Hitoshi Haga,
``Control Method for Reducing the Motor Loss of Dual-inverter Fed Open-end winding Induction Motor in the Low-speed Region,''
IEEJ J. Industry Applications, vol. 9, no. 1, pp. 27--35, 2020.
A. Oda and Y. Tsutsumi
``Feasibility Study of Vision-based Localization Method for Stopping Control Using Real Environment Data,''
IEEJ J. Industry Applications, vol. 8, no. 6, pp. 934--940, 2019.
W. Kampeerawat and T. Koseki
``Efficient Urban Railway Design Integrating Train Scheduling, Wayside Energy Storage, and Traction Power Management,''
IEEJ J. Industry Applications, vol. 8, no. 6, pp. 915--925, 2019.
W. Kampeerawat and T. Koseki
``Integrated Design of Smart Train Scheduling, Use of Onboard Energy Storage, and Traction Power Management for Energy-Saving Urban Railway Operation,''
IEEJ J. Industry Applications, vol. 8, no. 6, pp. 893--903, 2019.
S. Maekawa, M. Wu, and H. Kubota
``Position Sensorless Control Method for Permanent Magnet Synchronous Motors Using Speed Observer and Opened Phase Voltage Caused by Magnetic Saliency,''
IEEJ J. Industry Applications, vol. 8, no. 6, pp. 875--883, 2019.
Yoko Takeuchi, Tomoyuki Ogawa, Keisuke Sato, Hiroaki Morimoto, and Tatsuhito Saito
``Power Control Optimization of an Energy Storage System in DC Electric Railways,''
IEEJ J. Industry Applications, vol. 8, no. 5, pp. 827--834, 2019.
Katsumi Yamazaki and Hiroki Narushima
``Procedure for Optimization of Interior Permanent Magnet Synchronous Motors with Concentrated Windings by Considering End-Leakage Flux,''
IEEJ J. Industry Applications, vol. 8, no. 5, pp. 820--826, 2019.
Dongwoo Lee, and Kan Akatsu,
``Selection Method of Controller Gains for Position Sensorless Control of IPMSM Drives,''
IEEJ J. Industry Applications, vol. 8, no. 4, pp. 720--726, 2019.
Jun-ichi Itoh, Takato Toi, and Koroku Nishizawa,
``Stabilization Method for IPMSM with Long Electrical Time Constant Using Equivalent Resistance Gain Based on V/f Control,''
IEEJ J. Industry Applications, vol. 8, no. 4, pp. 592--599, 2019.
Shun Ichikawa, and Masafumi Miyatake,
``Energy Efficient Train Trajectory in the Railway System with Moving Block Signaling Scheme,''
IEEJ J. Industry Applications, vol. 8, no. 4, pp. 586--591, 2019.
Ufot Ufot Ekong, Mamiko Inamori, and Masayuki Morimoto,
``Field-Weakening Control for Torque and Efficiency Optimization of a Four-Switch Three-Phase Inverter-Fed Induction Motor Drive,''
IEEJ J. Industry Applications, vol. 8, no. 3, pp. 548--555, 2019.
Nguyen Gia Minh Thao, Nicolas Denis, Yenyi Wu, Shunya Odawara, and Keisuke Fujisaki,
``Study of the Effect of Load Torque on the Iron Losses of Permanent Magnet Motors by using Finite Element Analysis,''
IEEJ J. Industry Applications, vol. 8, no. 3, pp. 522--531, 2019.
Toru Ogawa, Tomohira Takahashi, Masatsugu Takemoto, Satoshi Ogasawara, Hideaki Arita, and Akihiro Daikoku,
``Increasing the Operating Speed of a Consequent Pole Axial Gap Motor for Higher Output Power Density,''
IEEJ J. Industry Applications, vol. 8, no. 3, pp. 497--504, 2019.
Kenta Takishima and Kazuto Sakai,
``Starting Characteristics of Axial and Radial Type Ultra-Lightweight Motors Based on Magnetic Resonance Coupling,''
IEEJ J. Industry Applications, vol. 8, no. 3, pp. 471--479, 2019.
Akihiro Ura, Masayuki Sanada, Shigeo Morimoto, and Yukinori Inoue,
``Influence of Structural Differences on Motor Characteristics of Concentrated Winding IPMSMs Obtained by Automatic Design,''
IEEJ J. Industry Applications, vol. 8, no. 3, pp. 458--464, 2019.
Hideki Ohguchi, Satoshi Imamori, Katsumi Yamazaki, Haiyan Yui, and Masao Shuto,
``Analyses of Circulating-current Loss in Armature Windings and In-plane Eddy-current Loss in Electrical Steel Sheets of Permanent-magnet Synchronous Machines,''
IEEJ J. Industry Applications, vol. 8, no. 3, pp. 452--457, 2019.
Yuuto Yamamoto, Shigeo Morimoto, Masayuki Sanada, and Yukinori Inoue,
``Reduction of Torque Ripple in Synchronous Reluctance Motor by Combining Different Flux Barrier Structures,''
IEEJ J. Industry Applications, vol. 8, no. 3, pp. 430--436, 2019.
Kodai Abe, Hitoshi Haga, Kiyoshi Ohishi, Yuki Yokokura, and Haruya Kada,
``Source Current Harmonics and Motor Copper Loss Reduction Control of Electrolytic Capacitor-less Inverter for IPMSM Drive,''
IEEJ J. Industry Applications, vol. 8, no. 3, pp. 404--412, 2019.
Yousuke Akama, Kodai Abe, Yushi Araki, Kiyoshi Ohishi, Yuki Yokokura, Koji Kobayashi, and Tatsuki Kashihara,
``Predictive Direct DC-link Current Control of IPMSM Drive System Using Electrolytic Capacitorless Inverter for Fine Harmonics Suppression,''
IEEJ J. Industry Applications, vol. 8, no. 3, pp. 394--403, 2019.
Francesco Cigarini, Shingo Ito, Stefan Troppmair, and Georg Schitter,
``Comparative Finite Element Analysis of a Voice Coil Actuator and a Hybrid Reluctance Actuator,''
IEEJ J. Industry Applications, vol. 8, no. 2, pp. 192--199, 2019.
Norio Miyauchi,
``Reduction of the Power Consumption of a Stepping Motor for Driving the Hands of Wristwatches,''
IEEJ J. Industry Applications, vol. 8, no. 1, pp. 140--141, 2019.
Douglas Martins Araujo, Faguy Tamwo Simo, and Yves Perriard,
``General Sensorless Method with Parameter Identification and Double Kalman Filter Applied to a Bistable Fast Linear Switched Reluctance Actuator for Textile Machine,''
IEEJ J. Industry Applications, vol. 8, no. 1, pp. 33--40, 2019.
Lazhar Ben-Brahim, Adel Gastli, Teruo Yoshino, Tomoki Yokoyama, and Atsuo Kawamura,
``Review of Medium Voltage High Power Electric Drives,''
IEEJ J. Industry Applications, vol. 8, no. 1, pp. 1--11, 2019.
Shrinathan Esakimuthu Pandarakone, Yukio Mizuno, and Hisahide Nakamura,
``Online Slight Inter-Turn Short-Circuit Fault Diagnosis Using the Distortion Ratio of Load Current in a Low-Voltage Induction Motor,''
IEEJ J. Industry Applications, vol. 7, no. 6, pp. 473--478, 2018.
Kenshi Matsuo, Zheng Xiang, Takeshi Miura, and Katsubumi Tajima,
``Automatic Tuning of Pulse Timings Using Neural Network for Rotor Oscillation Damping of a Stepping Motor,''
IEEJ J. Industry Applications, vol. 7, no. 5, pp. 443--444, 2018.
Tenjiro Hiwatari, Kiyoshi Ohishi, Yuki Yokokura, Haruya Kada, Sota Sano, and Akira Satake,
``Fast Torque Response and Reduced Pulse Width Modulation Switching Frequency Based on Model Predictive Direct Torque Control and Selective Harmonic Elimination,''
IEEJ J. Industry Applications, vol. 7, no. 5, pp. 431--440, 2018.
Hiroshi Yoda, and Yasuaki Sakamoto,
``Considerations in the Numerical Design for the Armatures of LIM-Type Eddy-Current Rail Brakes,''
IEEJ J. Industry Applications, vol. 7, no. 5, pp. 425--430, 2018.
Tsutomu Miyauchi, Kenji Imamoto, Keiko Teramura, and Hirotaka Takahashi ,
``Evaluating the Accuracy of Railway Total Simulator Compared with Actual Measurement Data,''
IEEJ J. Industry Applications, vol. 7, no. 5, pp. 416--424, 2018.
Kenshi Matsuo, Takeshi Miura, and Katsubumi Tajima ,
``Precise Position Control of a Stepping Motor in Micro-step Drive Using Pre-compensator,''
IEEJ J. Industry Applications, vol. 7, no. 4, pp. 369--370, 2018.
Yuichiro Yamanaka, Masami Nirei, Mitsuhide Sato, Hironobu Murata, Yinggang Bu, and Tsutomu Mizuno ,
``Design of a Linear Synchronous Generator and Examination of the Driving Range for a Free-Piston Engine Linear Generator System,''
IEEJ J. Industry Applications, vol. 7, no. 4, pp. 351--357, 2018.
Mitsuhide Sato, Masami Nirei, Yuichiro Yamanaka, Hironobu Murata, Yinggang Bu, and Tsutomu Mizuno ,
``Operation Range of Generation Braking Force to Achieve High Efficiency Considering Combustion in a Free-Piston Engine Linear Generator System,''
IEEJ J. Industry Applications, vol. 7, no. 4, pp. 343--350, 2018.
T.A. van Beek, J.W. Jansen, B.L.J. Gysen, and E.A. Lomonova ,
``Electromagnetic and Mechanical Performance of Direct and Indirectly Liquid-cooled Coreless Linear Motors with Multi-layer Coils,''
IEEJ J. Industry Applications, vol. 7, no. 4, pp. 329--335, 2018.
Atsushi Yao, Kouhei Tsukada, and Keisuke Fujisaki ,
``Investigating Iron Loss Properties in an Amorphous Ring Excited by Inverters based on Silicon and Gallium Nitride,''
IEEJ J. Industry Applications, vol. 7, no. 4, pp. 321--328, 2018.
Toshiko Nakagawa and Taiki Takada ,
``Magnetic Levitation of 0.1-mm-thick Steel Plate Considering its Flexibility and Inductance Characteristics,''
IEEJ J. Industry Applications, vol. 7, no. 4, pp. 314--320, 2018.
Yuji Shindo, Akihisa Kameari, Kengo Sugahara, and Tetsuji Matsuo ,
``Dynamical Model of an Electromagnet using Cauer Ladder Network Representation of Eddy-current Fields,''
IEEJ J. Industry Applications, vol. 7, no. 4, pp. 305--313, 2018.
Jongwon Heo, and Keiichiro Kondo,
``Maximum Continuous Operation Time Control of PMSM with Compressor Loads of Air Conditioners under DC Power Supply Loss,'' ,
IEEJ J. Industry Applications, vol. 7, no. 3, pp. 268--269, 2018.
Hiroyasu Kobayashi, Keiichiro Kondo, Tetsuya Iwasaki, and Akihiro Tsumura,
``Experimental Study on Increasing Regenerative Power by Improving Regenerative Brake Control of Rail Vehicles in DC-electrified Railways,'' ,
IEEJ J. Industry Applications, vol. 7, no. 3, pp. 266--267, 2018.
Takuya Noguchi, Sakahisa Nagai, and Atsuo Kawamura,
``Electromagnetic Linear Actuator providing High Force Density per Unit Area without Position Sensor as a Tactile Cell,'' ,
IEEJ J. Industry Applications, vol. 7, no. 3, pp. 259--265, 2018.
Masayuki Kato, and Katsuhiro Hirata,
``Characteristic Evaluation of Linear Resonant Actuator Utilizing Electrical Resonance,'' ,
IEEJ J. Industry Applications, vol. 7, no. 2, pp. 175--180, 2018.
Hamin Song, and Shinji Doki,
``Evaluation Method to Estimate Position Control Error in Position Sensorless Control Based on Pattern Matching Method,'' ,
IEEJ J. Industry Applications, vol. 7, no. 1, pp. 73--79, 2018.
Kazuki Hirono, Reona Hoshino, Tsuyoshi Kamiya, Shinji Wakao, Yoshifumi Okamoto, and Woojin Jeon,
``Design Optimization of Primary Core in Induction Heating Roll by the Combination of 2D Level-set Method and 3D Coupled Magnetic-Thermal FEM,'' ,
IEEJ J. Industry Applications, vol. 7, no. 1, pp. 64--72, 2018.
Hiroyuki Kaimori, and Kan Akatsu,
``Behavior Modeling of Permanent Magnet Synchronous Motors Using Flux Linkages for Coupling with Circuit Simulation,'' ,
IEEJ J. Industry Applications, vol. 7, no. 1, pp. 56--63, 2018.
Yusuke Oki, Tomoyuki Ogawa, and Jun'ichiro Kawaguchi,
``Train Power Demand Control Using Decentralized and Parallel Control Scheme,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 482--489, 2017.
Hiroya Sugimoto, Itsuki Shimura, and Akira Chiba,
``Principle and Test Results of Energy-Saving Effect of a Single-Drive Bearingless Motor in Cooling Fan Applications,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 456--462, 2017.
Masafumi Fujita, Takaaki Hirose, Takashi Ueda, Hiroyuki Ishizuka, Masashi Okubo, Ken Nagakura, and Tadashi Tokumasu,
``Inter-strand Circulating Current Analysis of End-region Transposed Coil of Power Generator using 3D Multi-layer FEM,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 449--455, 2017.
Ufot Ufot Ekong, Mamiko Inamori, and Masayuki Morimoto,
``Instantaneous Vector Control of Four Switch Three Phase Inverter Fed Induction Motor Drive,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 429--434, 2017.
Thanh Anh Huynh, and Min-Fu Hsieh,
``Performance Evaluation of Interior Permanent Magnet Motors Using Thin Electrical Steels,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 422--428, 2017.
Takeo Ishikawa, Taiki Watanabe, and Nobuyuki Kurita,
``Effect of Cleaning Level on Topology Optimization of Permanent Magnet Synchronous Generator,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 416--421, 2017.
Kenta Yamano, Shigeo Morimoto, Masayuki Sanada, and Yukinori Inoue,
``Design of Surface Permanent Magnet Synchronous Motor Using Design Assist System for PMSM,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 409--415, 2017.
Yuki Shimizu, Shigeo Morimoto, Masayuki Sanada, and Yukinori Inoue,
``Influence of Permanent Magnet Properties and Arrangement on Performance of IPMSMs for Automotive Applications,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 401--408, 2017.
Hirokatsu Katagiri, Hiroyuki Sano, Kazuki Semba, Noriyo Mimura, and Takashi Yamada,
``Fast Calculation of AC Copper Loss for High Speed Machines by Zooming Method,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 395--400, 2017.
Shin Kusase, and Kazumi Kurihara,
``A Proposal for a New Variable Leakage Flux Motor with Interpolar Gap and Permanent Magnets,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 381--386, 2017.
Soumitra Kunte, Mandar Bhawalkar, N. Gopalakrishnan, and Yogesh Nerkar,
``Optimal Design and Comparative Analysis of Different Configurations of Brushless Doubly Fed Reluctance Machine,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 370--380, 2017.
Katsumi Yamazaki, Ren Suzuki, Motoharu Nuka, and Makoto Masegi,
``Characteristics Analysis of Claw-Pole Alternator for Automobiles by Nonlinear Magnetic Field Decomposition for Armature Reaction,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 362--369, 2017.
Nicolas Denis, Yenyi Wu, and Keisuke Fujisaki,
``Impact of the Inverter DC Bus Voltage on the Iron Losses of a Permanent Magnet Synchronous Motor at Constant Speed,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 346--352, 2017.
Kenta Motoyoshi, Haruyuki Kometani, Nobuyuki Sora, and Susumu Maeda,
``Large-Scale 3D Electromagnetic Field Analysis for Estimation of Stator End Region Loss in Turbine Generators,'' ,
IEEJ J. Industry Applications, vol. 6, no. 6, pp. 340--345, 2017.
Ryota Takahashi, Kiyoshi Ohishi, Yuki Yokokura, Hitoshi Haga, and Tenjiroh Hiwatari,
``Stationary Reference Frame Position Sensorless Control Based on Stator Flux Linkage and Sinusoidal Current Tracking Controller for IPMSM,'' ,
IEEJ J. Industry Applications, vol. 6, no. 3, pp. 181--191, 2017.
Ryo Tanabe, and Kan Akatsu,
``Advanced Torque Control of Permanent Magnet Synchronous Motor Using Finite Element Analysis Based Motor Model with a Real-time Simulator,'' ,
IEEJ J. Industry Applications, vol. 6, no. 3, pp. 173--180, 2017.
Kosuke Kondo, and Shinji Doki,
``Position Estimation System for PMSM Position Sensorless Control in Inverter Overmodulation Drive,'' ,
IEEJ J. Industry Applications, vol. 6, no. 3, pp. 165--172, 2017.
Sho Masuyama, Takuya Noguchi, and Atsuo Kawamura, ,
``Electromagnetic Linear Actuator with Two Stators and One Rotor for Tactile Display,'' ,
IEEJ J. Industry Applications, vol. 6, no. 2, pp. 160--164, 2017.
Keiichi Katsuta, Kenji Imamoto, and Hiroyuki Tani, ,
``Ring Topology Railway Signalling with Information Sharing among Onboard and Switch Controllers,'' ,
IEEJ J. Industry Applications, vol. 6, no. 2, pp. 130--139, 2017.
Kei Matsuura, Yousuke Akama, Kodai Abe, Kiyoshi Ohishi, Hitoshi Haga, and Itaru Ando, ,
``Fine Three-Phase Current Reconstruction based on Calculating the Phase-Shifted Voltage Reference Using Only the DC Current Sensor of an Inverter and Its Application to a PM Motor Drive,'' ,
IEEJ J. Industry Applications, vol. 6, no. 1, pp. 58--65, 2017.
Yosuke Nakayama, Atsushi Matsumoto, and Masaru Hasegawa, ,
``Position Sensorless Control System within Over-modulation Range Based on Mathematical Model Robust against Magnetic Saturation of IPMSMs,'' ,
IEEJ J. Industry Applications, vol. 6, no. 1, pp. 36--45, 2017.
Akira Satake, Yuriko Okamoto, and Satoru Kato, ,
``Design of Coupling Cancellation Control for a Double-winding PMSM,'' ,
IEEJ J. Industry Applications, vol. 6, no. 1, pp. 29--35, 2017.
Kazuto Sakai, and Kouki Matsuda, ,
``Permanent Magnet Motor with Reversible Salient Poles and Variable Magnetic Force,'' ,
IEEJ J. Industry Applications, vol. 6, no. 1, pp. 19--28, 2017.
Atsushi Shinohara, Yukinori Inoue, Shigeo Morimoto, and Masayuki Sanada, ,
``Correction Method of Reference Flux for Maximum Torque per Ampere Control in Direct-Torque-Controlled IPMSM Drives,'' ,
IEEJ J. Industry Applications, vol. 6, no. 1, pp. 12--18, 2017.
Kodai Abe, Hitoshi Haga, Kiyoshi Ohishi, and Yuki Yokokura, ,
``Current Ripple Suppression Control Based on Prediction of Resonance Cancellation Voltage for Electrolytic-Capacitor-Less Inverter,'' ,
IEEJ J. Industry Applications, vol. 6, no. 1, pp. 1--11, 2017.
Shuhei Shimmyo, Kazuaki Yuki, and Kouhei Ohnishi, ,
``Torque Ripple Suppression Method with Multilevel Inverter and Feedforward Dead-Time Compensation,'' ,
IEEJ J. Industry Applications, vol. 5, no. 4, pp. 360--369, 2016.
Kenta Mitsufuji, Shuhei Matsuzawa, Katsuhiro Hirata, and Fumikazu Miyasaka, ,
``Meshless Method Employing Magnetic Moment Method and Particle Method for Magnetic Fluid Motion Analysis,'' ,
IEEJ J. Industry Applications, vol. 5, no. 4, pp. 355--359, 2016.
Masayuki Kato, Junya Nitta, and Katsuhiro Hirata, ,
``Optimization of Asymmetric Acceleration Waveform for Haptic Device Driven by Two-Degree-of-Freedom Oscillatory Actuator,'' ,
IEEJ J. Industry Applications, vol. 5, no. 3, pp. 215--220, 2016.
Hiroki Hijikata, Kan Akatsu, Yoshihiro Miyama, Hideaki Arita, and Akihiro Daikoku, ,
``AMATRIX Motor with Individual Control Capability for Iron Loss Suppression under Flux Weakening Control,'' ,
IEEJ J. Industry Applications, vol. 5, no. 2, pp. 176--183, 2016.
Ryo Tanabe, and Kan Akatsu, ,
``Advanced Torque and Current Control Techniques for PMSMs with a Real-time Simulator Installed Behavior Motor Model,'' ,
IEEJ J. Industry Applications, vol. 5, no. 2, pp. 167--173, 2016.
Shuhei Shimmyo, Katsutoku Takeuchi, Norio Takahashi, Makoto Matsushita, and Kouhei Ohnishi, ,
``Multi-level Motor Drives for Torque Ripple Suppression Taking Control Sensitivity into Account,'' ,
IEEJ J. Industry Applications, vol. 5, no. 2, pp. 69--77, 2016.
Sakahisa Nagai, Takahiro Nozaki, and Atsuo Kawamura, ,
``Real-time Sensorless Estimation of Position and Force for Solenoid Actuators,'' ,
IEEJ J. Industry Applications, vol. 5, no. 2, pp. 32--38, 2016.
Michael Fleischer, and Keiichiro Kondo, ,
``Slip-Stick Vibration Suppression by Modal State Control for Traction Drive-Trains,'' ,
IEEJ J. Industry Applications, vol. 5, no. 1, pp. 1--9, 2016.

* The above references are available for LaTeX format.