|
|
| JANUARY 2007 Volume 127-E Number 1 |
| Title |
Author |
Page |
Extended Summary |
| Wavelength Shift Detection of Fiber Bragg Grating by Dynamic Strain using
Serrodyne Modulation |
Y. Shinoda, Y. Sakumoto, & T. Higo |
1 |
 |
| Improvement of Ultrasonic Micro Array Sensor Using the Amorphous Fluorocarbon
Polymer Film |
T. Tanaka, S. Lee, M. Uno, K. Inoue, S. Aoyagi, K. Yamashita, & M.
Okuyama |
7 |
 |
| Application of the Spectral Sensitivity for the Semiconductor Junction Analysis |
T. Ichibakase |
14 |
 |
| Development of FBG Strain-Detection System with Narrow Band Filter using
a Scanning FBG |
T. Takahama, A. Yokotani, & K. Kurosawa |
19 |
 |
Three-Wing Optical Mixer Design, Fabrication and Application to a -TAS |
H. Ukita, K. Takada, D. Akagi, T. Ohnishi, & Y. Nonohara |
25 |
 |
| A Method to Measure Beam Deflections in Different Resonance Modes Piezoresistively
and its Incorporation into 2D Optical Microscanners |
H. Muro, T. Oki, A. Asaoka, T. Bourouina, G. Reyne, A. Debray, E. Lebrasseur,
& H. Fujita |
31 |
 |
| High Speed Surface Micro-Polishing for Spurious Reduction of Small Quartz
Crystal Blanks |
T. Hatsuzawa, H. Hamano, M. Saito, & Y. Yanagida |
37 |
 |
|
 |
| FEBRUARY 2007 Volume 127-E Number 2 |
| Title |
Author |
Page |
Extended Summary |
| Development of Micro Rotary Reactor Causing Spiral Laminar Flow Interfaces |
H. Furusawa, K. Suzumori, T. Kanda, Y. Yamada, Y. Sakata, & A. Muto |
47 |
 |
| Development of Micro Lancet Needle Made of Biodegradable Polymer for Medical Treatment |
S. Aoyagi, H. Izumi, T. Aoki, & M. Fukuda |
53 |
 |
| Development of a Microdevice for Cellular Analysis Integrated with Microvalves |
M. Kanai, T. Munaka, H. Abe, H. Nakanishi, & S. Shoji |
63 |
 |
| Endoscopic Therapeutic Device Using Focused Ultrasonic Small Transducer |
A. Yasui, Y. Haga, J. Chen, H. Iseki, M. Esashi, & H. Wada |
69 |
 |
| Active Bending Electric Endoscope Using Shape Memory Alloy Coil Actuators |
W. Makishi, T. Matsunaga, M. Esashi, & Y. Haga |
75 |
 |
| Fabrication of Micro-Lens Array using a Chemically Adsorbed Monomolecular
Layer |
K. Okada, F. Oohira, M. Hosogi, G. Hashiguchi, Y. Mihara, K. Ogawa, & K. Shiwaku |
82 |
 |
| Study on New Chain Encoding Scheme Suitable for Isodensity Contours |
Y. Kato & O. Nakamura |
89 |
 |
| Polycrystalline Diamond Pressure Sensor using Spin Coat Seeding Method |
K. Mishima, R. Mori, & K. Takahashi |
96 |
 |
| Mechanical Property Evaluation of Micro Cantilever Fabricated Using Micro-Stereolithography |
M. Miwa, H. Kawaguchi, K. Douoka, S. Yoneyama, S. Tuchitani, & Y. Koshimoto |
102 |
 |
|
 |
| MARCH 2007 Volume 127-E Number 3 |
| Title |
Author |
Page |
Extended Summary |
|
Development of Electrostatic Actuator, which enables the Stable Contact Resistance, Driven at Low Voltage
|
T. Masuda, T. Seki, T. Miyaji, & F. Sato |
116 |
 |
|
Analysis of Electrically Induced Swirling Flow of Isotonic Saline in a Mixing Microchannel
|
S. Hirahara, T. Tsuruta, Y. Matsumoto, & H. Minamitani |
121 |
 |
| Sensitivity of Micro Cantilever Mass Sensor Transduced by PZT Film |
J. Lu, T. Ikehara, M. Konno, R. Maeda, & T. Mihara |
126 |
 |
| Fabrication and Characterization of a Schottky Barrier Diode-Type Ultraviolet Sensor using a ZnO Single Crysta |
H. Endo, M. Sugibuchi, K. Takahashi, S. Goto,
T. Hasegawa, E. Ohshima,
K. Meguro, K. Hane, & Y.Kashiwaba
|
131 |
 |
| Ambient Temperature Compensation of Thin Film Pirani Vacuum Sensor |
H. Yonekura & M. Kimura |
136 |
 |
| Pn Junction Temperature-Sensor by Use of Superimposed AC Signal |
N. Takashima & M. Kimura |
140 |
 |
| Reliability of Surface MEMS Structures Fabricated Using Standard CMOS Back-End-Of-Line
Processes |
Y. Hanaoka, T. Fujimori, K. Fujisaki, & H. Fukuda |
144 |
 |
| The Displacement Measurement Device using a Comb-Drive Actuator |
K. Suzuki, K. Ayano, & G. Hashiguchi |
148 |
 |
| Fabrication of MOSFET Capacitive Sensor using Spray Coating Method |
S. Aoyagi, Y. Matsui, K. Makihira, H. Tokunaga, M. Sasaki, & K. Hane |
153 |
 |
| Photonic Bandgap Fiber for a Sensing Device |
J. Pawl~at, T. Sugiyama, T. Matsuo, & T. Ueda |
160 |
 |
| Study of PEG Tether Length of Pegylated-Lipid Sensing Films in QCM Odor Sensors |
B. Wyszynski, P. Somboon, & T. Nakamoto |
165 |
 |
| High Resolution CNT-FED and Improvement in Field-Emission Characteristics |
H. Kurachi, S. Uemura, J. Yotani, T. Nagasako, H. Yamada, T. Ezaki, T. Maesoba, T. Nakao,
M. Ito, A. Sakurai, H. Shimoda, Y. Saito, & H. Shinohara
|
170 |
 |
|
Fabrication and Characterization of 3-DOF Soft-Contact Tactile Sensor Utilizing 3-DOF Micro Force Moment Sensor
|
D. V. Dao, Q. Wang, & S. Sugiyama |
177 |
 |
| Multi-Probe SPM using Interference Patterns for a Parallel Nano Imaging |
H. Koyama, F. Oohira, M. Hosogi, & G. Hashiguchi |
182 |
 |
| Fabrication and Characterization of Smooth Si Mold for Hot Embossing Process |
P. H. Pham, D. V. Dao, S. Amaya, R. Kitada, & S. Sugiyama |
187 |
 |
|
 |
| APRIL 2007 Volume 127-E Number 4 |
| Title |
Author |
Page |
Extended Summary |
|
Self-Assembly and Magnetic Actuation of Three Dimensional Micro Hinged
Mechanisms
|
H. Yamada,K. Suzuki, H. Miura, & H. Takanobu |
207 |
 |
| Sequential Stacking Self-Assembly Using Interfacial Tension of Two Different Droplets |
Y. Higuchi, K. Sugano, T. Tsuchiya, & O. Tabata |
214 |
 |
|
Suppression of Stiction Force by All-Vapor Processes Using HF, Ozone, and HMDS
for MEMS Devices
|
Y. Taii, K. Kakushima, R. Yokokawa, S. Ono,
T. Takahashi, K. Isamoto, C. Chong, H. Fujita, & H. Toshiyoshi
|
221 |
 |
| Effect of NO2 Gas Adsorption on Electrical Properties of Pyrolyzed Polymer |
K. Naka, T. Hashishin, J. Tamaki, & S. Konishi |
228 |
 |
| Transport Properties of ZnSe-ITO Hetero Junction |
T. Ichibakase |
234 |
 |
| Thermal Anemometer Using a Micro-Air-Bridge Heater with Chip Scale Wind Tunnel |
S. Yasaka, S. Ohya, M. Mitsuhashi, S. Kaneko, T. Ito, Y. Kanno,
Y. Aikyo, S. Komuro, K. Ohbayashi, & M. Kimura
|
241 |
 |
|
Measurement of Temperature and Wind Velocity Based on Multi-Functional
Measurement Using a Thermistor
|
A. Shimoyama & K. Shida |
247 |
 |
|
Conformal Coating of Organic Dielectric Film on Gold Electrodes in
Microelectromechanical System Devices by Electrodeposition
|
T. Sakata, Y. Okabe, K. Kuwabara, N. Sato,
K. Kudou, K. Machida, & H. Ishii
|
253 |
 |
|
 |
| MAY 2007 Volume 127-E Number 5 |
| Title |
Author |
Page |
Extended Summary |
|
A Hemoglobin and Volume Measurement Sensor for Point of Care Testing Analyzer
Using MEMS Process
|
R. Tanabe, S. Hata, & A. Shimokohbe |
267 |
 |
|
Image Quality Degradation Reduction Method for Wireless Transmission of Compressed
Moving Picture Using Weighted CDMA Channel
|
T. Nakaya, M. Date, R. Tezuka, & A. Sugiura |
272 |
 |
| Fiber-Delivered Acoustic 3D Imaging System with Laser-Induced Breakdown |
Y. Yasumuro, T. Sugiura, O. Oshiro, & K. Chihara |
284 |
 |
| A Novel Multifunctional Angular Position Sensor with Magnetic Fluid |
W. Quan & K. Shida |
290 |
 |
| Electrical Characteristics of Piezoelectric RF-MEMS Tunable Capacitor |
M. Nishigaki, T. Nagano, K. Abe, K. Itaya, & T. Kawakubo |
297 |
 |
|
 |
| JUNE 2007 Volume 127-E Number 6 |
|
|
 |
| JULY 2007 Volume 127-E Number 7 |
| Title |
Author |
Page |
Extended Summary |
|
Wet Etched High Aspect Ratio Microstructures on Quartz for MEMS Applications
|
J. Liang, F. Kohsaka, T. Matsuo, & T. Ueda |
337 |
 |
|
Development of Solution Measurement Using Laser-Induced Breakdown Spectroscopy Integrated with Micro-Droplet Ejection System
|
S. Ikezawa, M. Wakamatsu, & T. Ueda |
343 |
 |
| Optimization of PZT Diaphragm Pump for the Convective Gyroscope |
V. T. Dau, D. V. Dao, T. X. Dinh, T. Shiozawa, & S. Sugiyama |
347 |
 |
| Detection of Smoldering Fire Using Tin Oxide Gas Sensors |
T. Higashino, A. Sawada, T. Oyabu, Y. Takei, H. Nanto, & K. Toko |
353 |
 |
| Measurement of Bad-Smell Distribution Using Sensing Network Composed of Nodes with Gas Detector Tubes and CCD Image Sensors |
T. Nakamoto, Y. Tanaka, & H. P. Ninh |
359 |
 |
|
 |
| AUGUST 2007 Volume 127-E Number 8 |
| Title |
Author |
Page |
Extended Summary |
|
Automation of pH Measurement Using a Flow-Through Type Differential pH Sensor System Based on pH-FET
|
S. Mohri, M. Nakamura, & K. Naruse |
367 |
 |
|
Optimized Design of Plastic Package for InSb Thin-Film Magneto-Resistance Devices for Gear-Tooth Rotation Detection
|
A. Okamoto, K. Nishimura, H. Goto, K. Yoshida, & I. Shibasaki |
371 |
 |
| Multi-Channel Taste Sensor with LB Films |
T. Arata, T. Hirata, & M. Akiya |
376 |
 |
| Study for Identification of Mixed Taste Materials by the Taste Sensor with LB Film |
R. Kikuchi, T. Hirata, & M. Akiya |
382 |
 |
|
 |
| SEPTEMBER 2007 Volume 127-E Number 9 |
| Title |
Author |
Page |
Extended Summary |
|
Particle Element and Size Simultaneous Measurement Using LIBS
|
M. Wakamatsu, S. Ikezawa, & T. Ueda |
397 |
 |
|
Fundamental Study of Multi-Functional Sensors by Using Optical Branching
Circuit with Loop Waveguide
|
M. Fujimoto, W. Tanaka, H. Mae, K. Yoshimura, M. Hotta, M. Matsunaga, & K. Ono |
403 |
 |
| Development of Highly Sensitive Temperature Sensor Using Ni foil |
S. Ichida, T. Okamoto, T. Yamaguchi, & H. Kumehara |
409 |
 |
|
 |
| OCTOBER 2007 Volume 127-E Number 10 |
| Title |
Author |
Page |
Extended Summary |
|
Response Characteristics of Plant Bioelectric Potential to Light Intensity Indoor and Outdoor
|
T. Shimbo, M. Fujii, A. Sawada, T. Oyabu, & H. Kimura |
425 |
 |
|
High Sensitive Tilt Sensor for Quartz Micromachining
|
F. Kohsaka, J. Liang, T. Matsuo, & T. Ueda |
431 |
 |
| The Judgement Formula of the Adhesion on the Circular Plate with Beams |
S. Tezuka & N. Kanbara |
437 |
 |
| High Aspect Ratio Si Prismatic Shape Forming Technology Using Crystallographic Orientation-Dependent Etching |
S. Nagao, F. Oohira, M. Hosogi, & G. Hashiguchi |
443 |
 |
|
 |
| NOVEMBER 2007 Volume 127-E Number 11 |
| Title |
Author |
Page |
Extended Summary |
|
Environmental Monitoring System for Home-Delivery Service of Packages by Using MEMS Sensors
|
T. Fujita, K. Masaki, & K. Maenaka |
472 |
 |
|
Application of Sensor Technologies for the Novel Railway Signal Control
System
|
Y. Fukuta, T. Kunifuji, N. Hiura, & M. Matsumoto |
478 |
 |
| Development of Maintenance Techniques of Railway Structures Applying Sensor
and Information Technologies |
S. Yamada, T. Nihei, Y. Kobayashi, K. Minegishi, T. Nakayama, & N.
Sato |
486 |
 |
| Applications of Voice/Sound Sensors in Railroad Field |
I. Shibasaki & M. Shozakai |
493 |
 |
| The Possibility of Train Speed and Position Detection of Magneto-Resistance
Elements |
K. Nishimura, S. Yamada, H. Goto, A. Okamoto, & I. Shibasaki |
499 |
 |
|
 |
| DECEMBER 2007 Volume 127-E Number 12 |
| Title |
Author |
Page |
Extended Summary |
|
MEMS Deformable Mirrors for Adaptive Optics Actuated by Piezoelectric PZT
Films
|
I. Kanno, T. Kunisawa, T. Suzuki, & H. Kotera |
518 |
 |
|
An Experimental Two-Axial Actuator for a Tactile Display Capable of Presenting Pressure and Slippage Sensations
|
M. Ohka, Y. Sawamoto, S. Matsukawa, T. Miyaoka, & Y. Mitsuya |
524 |
 |
| Neural Control for Two-Axial Micro Piezoelectric Actuators |
M. Ohka, Y. Sawamoto, S. Matsukawa, T. Miyaoka, & Y. Mitsuya |
533 |
 |
| High-k Dielectrics for Application in Broadband Radio Frequency-Microelectromechanical System Capacitive Shunt Switch |
Y. Zhang, J. Lu, M. Ichiki, K. Onodera, & R. Maeda |
540 |
 |
| Development of Remote-Type Haptic Catheter Sensor System Using PiezoelectricTransducer |
M. Haruta, Y. Murayama, & S. Omata |
546 |
 |
| Preparation of <001> Oriented PZT Thin Films and the Applications
to Micro Piezoelectric Devices |
R. Takayama, E. Fujii, T. Kamada, A. Murata, T. Hirasawa, A. Tomozawa, S. Fujii, H. Torii, & K. Nomura |
553 |
 |
|
 |
Adobe(R) Acrobat(R) Reader is needed to view,
navigate, and print PDF files. If you want
to get the Acrobat Reader software, click
the "Download" button please
|
|
 |