IEEJ Transactions on Sensors and Micromachines
Extended Summary |
|
This page consist of full text of English Papers which were published in our transactions.
This page shows full text of English Papers that were published on the transactions of our five societies |
|
 |
Adobe(R) Acrobat(R) Reader is needed to view,
navigate, and print PDF files. If you want
to get the Acrobat Reader software, click
the "Download" button please
|
|
|
|
|
| JANUARY 2006 Volume 126-E Number 1 |
| Title |
Author |
Page |
Extended Summary |
| A New Multifunctional Space Angle Sensor Using Capacitance Method |
C. Wang & K. Shida |
1 |
 |
| Fabrication of Plastic Micro Tip Array using Laser Micromachining of Nanoparticles Dispersed Polymer and Micromolding |
H. Yagyu, S. Hayashi, & O. Tabata |
7 |
|
| Selective Electrodeposition Technology for Organic Insulator Films on Microelectromechanical-System Structures |
T. Sakata, H. Ishii, Y. Okabe, N. Sato, M. Nagase, T. Kamei, K. Kudou, M. Yano, & K. Machida |
14 |
|
| Composition Dependence of Gas Diffusion Membrane on Sensor Characteristics for Detection of Toxic Gases |
Y. Mizutani, H. Matsuda, T. Ishiji, & N. Furuya |
19 |
|
|
| FEBRUARY 2006 Volume 126-E Number 2 |
| Title |
Author |
Page |
Extended Summary |
| Monitoring Car Drivers' Condition Using Image Processing -Measurement of Car Drivers' Consciousness in Consideration of Individual Differences- |
K. Adachi, N. Yamamoto, O. Yamamoto, T. Nakano, & S. Yamamoto |
31 |
|
| A Fingerprint Matching Technique Based on Phase-Only Correlation -Algorithm Design and Implementation for Fingerprint Matching Devices Dedicated to Home Applications- |
H. Nakajima, K. Kobayashi, M. Morikawa, A. Katsumata, K. Ito, T. Aoki, & T. Higuchi |
38 |
|
| Integrated Current-Mode Spatial Filtering Detector with Variable Multi-valued Weighting Function |
H. Go, J. Takayama, S. Ohyama, & A. Kobayashi |
47 |
|
| Small PEMFC System with Multi-layered Microreactor |
N. Ogura, Y. Kawamura, T. Yahata, K. Yamamoto, T. Terazaki, M. Nomura, K. Takeyama, O. Nakamura, T. Namai, T. Terada, H. Bitoh, T. Yamamoto, & A. Igarashi |
54 |
|
| Analysis of an Electric Field Sensor using Distortion of Helical Structure of Ferroelectric Liquid Crystal |
S. Uto, H. Morita, H. Ishima, & Y. Tsuji |
60 |
|
| Development of Electrostatic Actuator for Ohmic-Contact RF MEMS Switch/Relay |
T. Seki, T. Masuda, Y. Uno, F. Sato, K. Imanaka, & S. Sugiyama |
65 |
|
|
| MARCH 2006 Volume 126-E Number 3 |
| Title |
Author |
Page |
Extended Summary |
| Development of Micromachined Thermal Flow Sensor with Thermopiles |
S. Sasaki, T. Fujiwara, F. Sato, K. Imanaka, & S, Sugiyama |
83 |
|
| Development of MEMS Device for Electrical and Physical Characterization of Single Cell |
Y. Cho, N. Takama, T. Yamamoto, T. Fujii, & B. Kim |
89 |
|
| A Water-repellent Silanization Coating Technique for MEMS |
K. Shimaoka, H. Hosokawa, H. Funabashi, & Y. Mitsushima |
95 |
|
| Evaluation of a Microfluidic Device With an Electrochemical Detector UsingPhotosensitive Sheet as a Microchannel Structure |
T. Ito, T. Kawaguchi, H. Miyoshi, & S. Ohya |
101 |
|
| A Study on Environmental Recognitions by Odor Sensors Considered on the Conceptof Human Senses |
T. Misawa, Y. Takei, H. Nanto, K. Abe, & H. Kimura |
107 |
|
| The Blood Beat Measurement with Near Infrared Ray |
O. Oshiro, H. Horio, & Y. Masuda |
114 |
|
|
| APRIL 2006 Volume 126-E Number 4 |
| Title |
Author |
Page |
Extended Summary |
| Improvement of Positioning Performance of AZARASHI (Seal) Mechanism with Three Degrees of Freedom |
K. Furutani & K. Kawagoe |
131 |
|
| Improvement of Output Power of ECF Micromotor |
S. Yokota, K. Kawamura, K. Takemura, & K. Edamura |
137 |
|
| Development of a Small Two Axis Spherical Motor Type Laser Tracker with Submicron Measurement Accuracy |
T. Yano, T. Takatsuji, S. Osawa, T. Suzuki, Y. Motomura, & T. Itabe |
144 |
|
| An Experimental Compound Display for Pressure and Force Presentation |
M. Ohka, K. Kato, T. Fujiwara, & Y. Mitsuya |
150 |
|
| Temperature Dependence of Piezoelectric Properties of Sputtered Aluminum Nitride on Silicon Substrate |
K. Kano, K. Arakawa, Y. Takeuchi, M. Akiyama, N. Ueno, T. Kamohara, & N. Kawahara |
158 |
|
|
| MAY 2006 Volume 126-E Number 5 |
| Title |
Author |
Page |
Extended Summary |
| MEMS Variable Capacitor Using Cross Membranes for RF Band |
T. Shimanouchi, M. Imai, T. Nakatani, A. T. Nguyen, S. Ueda, I. Sawaki, & Y. Satoh |
180 |
|
| Application of Collective Synchronization to Sensor Data Processing |
Y. Abe, T. Miyano, & S. Sugiyama |
185 |
|
| A Dual Axis Accelerometer Utilizing Low Doped Silicon Thermistor |
V. T. Dau, D. V. Dao, M. Hayashida, T. X. Dinh, & S. Sugiyama |
190 |
|
| Manufacture of Ni Microprobe Using X-Ray Lithography and Plating Method -Behavior of Ni-plated Materials at a Constant Temperature Under Stress- |
T. Kimura, H. Fukinbara, & T. Hattori |
195 |
|
|
| JUNE 2006 Volume 126-E Number 6 |
| Title |
Author |
Page |
Extended Summary |
| Development of Optically Driven Microgears by Using Two-photon Microstereolithography |
H. Inoue, S. Haga, & S. Maruo |
216 |
|
| Three Dimensional Fabrication by Inclined Rotary Exposure |
K. Hanai, T. Nakahara, S. Suzuki, & Y. Matsumoto |
222 |
|
| Micro Probe Produced by 3D-Processing using Synchrotron Radiation |
T. Kimura, T. Ishida, & T. Hattori |
228 |
|
| A Contour-Lithography Method for Etching Nano-dimension and Large-dimension Openings |
M. Kubota, Y. Mita, F. Marty, T. Bourouina, & T. Shibata |
235 |
|
| Stability Diagram of the Fabry-Perot Resonators |
S. Tezuka & N. Kanbara |
243 |
|
| Basic Study on a Magnetically Levitated Conveyor Based on Guiding by Partial Magnetization of a High-Tc Superconductor |
T. Iizuka, N. Sakai, & H. Fujita |
248 |
|
| OPLEAF Fiber Array for High Density Optical IC |
T. Sonobe, N. Hiroi, M. Takenaka, Y. Nakano, & H. Fujita |
255 |
|
| 5-Axis Motion Sensor using SOI Wafer and the Design Method |
K. Okada, T. Kakutani, Y. Matsu, Y. Watanabe, T. Mitsui, T. Mineta, & S. Sugiyama |
261 |
|
|
| JULY 2006 Volume 126-E Number 7 |
| Title |
Author |
Page |
Extended Summary |
| Electromechanical Analysis of a Micromachined Comb-Drive Actuator by Admittance Measurement |
K. Ayano, K. Suzuki, G. Hashiguchi, & H. Fujita |
281 |
|
| Large Deflection Electrostatic Spiral Actuator with Twisted-beams |
S. Okamoto, N. Shimamoto, Y. Matsushita, T. Fujita, K. Maenaka, & Y. Takayama |
286 |
|
| Study of Halitosis-Substance Sensing at Low Concentration Using an Electrochemical Sensor Array Combined with a Preconcentrator |
Y. Sasaya & T. Nakamoto |
292 |
|
| A MEMS Complete Blood Count Sensor with Vanes for Reduction in Influence of Electrolysis Gas |
R. Tanabe, S. Hata, & A. Shimokohbe |
297 |
|
| Fabrication of Diaphragm Actuator using Bulk PZT |
T. Konishi, M. Ide, K. Tanaka, & S. Sugiyama |
302 |
|
| Design and Fabrication of Polymer Electrostatic Comb-Drive Actuators for Micro Conveyer Systems |
P. H. Pham, D. V. Dao, S. Amaya, R. Kitada, Y. Li, & S. Sugiyama |
306 |
|
| Improving Temperature-Stability of CMOS Rotary Encoders Using a Parallel-Connected MAGFET Array |
K. Nakano, T. Takahashi, & S. Kawahito |
312 |
|
| A CMOS One-chip Wireless Camera with Digital Image Transmission Function for Capsule Endoscopes |
S. Itoh, S. Kawahito, & S. Terakawa |
318 |
|
| Mirror Deformation by Piezoelectric Actuators |
F. Tanaka, S. Maeda, K. Nagashima, Y. Tsuchiya, K. Tanaka, A. Ishii, & S. Sugiyama |
325 |
|
| Simulation for Submicron 3D-Structures based on Plane-pattern to the Cross-section Transfer (PCT) Technique |
F. Kato, S. Fujinawa, & S. Sugiyama |
330 |
|
| Diamond Field Emission Source using Transfer Mold Technique Prepared by Diamond Powder Seeding |
S. Tezuka, Y. Matsuba, & K. Takahashi |
334 |
|
| Application of a Bulk High-Critical Temperature Superconductor using a Shock Compaction Method to Fabricate the Magnetic Sensor |
H. Fujita, H. Kezuka, & M. Itoh |
340 |
|
| Measurement and Compensation of Average-Irradiance Dependence in Frequency Response of Correlation Image Sensor |
A. Kimachi & S. Ando |
345 |
|
| Design and Fabrication of Two-Stage-Driven Cantilever-Based RF MEMS Micro-Switch |
H. Tauchi & K. Suzuki |
352 |
|
| Discrimination Characteristics of LB Film Taste Sensor Composed of Three-chain Compound |
N. Seto & M. Akiya |
358 |
|
| Charge-Storage-Type Optical Sensors with DOG-Function Characteristics |
Y. Matsui & Y. Miyoshi |
364 |
|
| Response of Plant Bioelectric Potential due to Wind Intensity |
T. Shimbo, T. Higashino, T. Oyabu, H. Kimura, & H. Nanto |
370 |
|
|
| AUGUST 2006 Volume 126-A Number 8 |
| Title |
Author |
Page |
Extended Summary |
| A High-Speed Thermoelectric Infrared Sensor Fabricated by CMOS Technology and Micromachining |
M. Hirota |
393 |
|
| Reliability Evaluation of Micro Heater and its Application for Automotive Sensors |
T. Kojima, Y. Tsujimura, T. Mizuno, Y. Koyama, M. Kida, & T. Yamada |
397 |
|
| Hierarchical Vision-based Algorithm for Vehicle Model Type Recognition from Time-sequence Road Images |
M. Zheng, T. Gotoh, & M. Shiohara |
403 |
|
| Evaluation of the Driver's Mental Workload by Conversational Form based on Facial Skin Thermal Image Analysis |
A. Nozawa, H. Mizawa, M. Tota, H. Tanaka, & H. Ide |
412 |
|
| Method for Presenting Auditory Information to Consciousness Status and Elderly Drivers While Driving |
H. Yamasaki, M. Fukumoto, O. Yamamoto, T. Nakano, & S. Yamamoto |
419 |
|
| SOI Angular Rate Sensor with Open Beam Structure |
M. Fujiyoshi, Y. Nonomura, Y. Omura, N. Fujitsuka, K. Mizuno, & K. Tsukada |
425 |
|
| Detecting Driver's Gaze Direction using the Rear-View Mirror Built in an Image Sensor |
M. Itoh, O. Yamamoto, M. Toriyama, S. Yamamoto, & S. Mori |
431 |
|
| Evaluation of Driver Stress Using Motor-vehicle Driving Simulator |
M. Deguchi, J. Wakasugi, T. Ikegami, S. Nanba, & M. Yamaguchi |
438 |
|
| Magneto-resistance Effect of Sn-doped InSb Single Crystal Thin Films and Application to Rotation Detection |
I. Shibasaki, K. Nishimura, H. Goto, & A. Okamoto |
445 |
|
| Design and Fabrication of a Laterally-Driven Silicon RF Micro-Switch with High Isolation |
S. Kamide & K. Suzuki |
453 |
|
| Video Surveillance System for Elderly Person Living Alone by Person Tracking and Fall Detection |
M. Doi, H. Inoue, Y. Aoki, & O. Oshiro |
457 |
|
| In-situ Measurement for Gas Concentrations using Tunable Lasers |
T. Sugiyama & T. Ueda |
464 |
|
| Thin Film Nickel Foil Temperature Sensors using very thin Zirconia Baseboards |
S. Ichida, T. Okamoto, & H. Kumehara |
469 |
|
| Study of 2D Scanning LIDAR Optics for Planetary Explorer |
T. Takahara, M. Mita, N. Takeyama, Y. Hamada, T. Takahashi, H. Toshiyoshi, & T. Mizuno |
476 |
|
| Noncontact Material Discrimination by Means of Optical and Electric Integrated Sensor |
S. Tsuji, A. Kimoto, & K. Shida |
481 |
|
| High-Speed and High-Sensitive Immunochemical Detection using Pillar Arrays |
C. Yoshimura & H. Nakano |
486 |
|
|
| SEPTEMBER 2006 Volume 126-A Number 9 |
| Title |
Author |
Page |
Extended Summary |
| Moving Mask Direct Photo-Etching (M2DPE) for 3D Micromachining of Polytetrafluoroethylene |
Y. Nakamura & O. Tabata |
499 |
|
| HRTEM Observation and Current Measurement of the Approach-Contact-Deformation- Fracture Process at MEMS Nano Contact between MEMS Opposing Tips |
T. Ishida, K. Kakushima, & H. Fujita |
504 |
|
| Simplified Identification of Compounding Ratio and Dispersion of Carbon Nanotube / Polymer Composite Material |
H. Wakiwaka, Y. Kumakura, & M. Endo |
510 |
|
| Characteristics of Silicon Nitride Reaction to Vapor-phase HF Gas Treatment |
K. Shimaoka, H. Funabashi, & Y. Mitsushima |
516 |
|
| Built-in Capacitive Displacement Sensor with Long Full-Scale Range for Electrostatic Microactuators |
T. Fukushige, T. Hayashi, S. Hata, & A. Shimokohbe |
522 |
|
|
| OCTOBER 2006 Volume 126-A Number 10 |
| Title |
Author |
Page |
Extended Summary |
| Preparation of Polystyrene and Surfactant Co-intercalated MoO3 Nano Hybrids and their VOC Gas Sensing Properties |
J. Wang, I. Matsubara, T. Itoh, N. Murayama, W. Shin, & N. Izu |
548 |
|
| Metal Oxide Semiconductor Nanoparticles for Chemical Gas Sensors |
M. -I. Baraton |
553 |
|
| Processing and Characterization of Nanostructured Metal Oxides for Gas Sensing Applications |
K. Kalyanasundaram & P. I. Gouma |
550 |
|
| Platinum Micro-Hotplates on Thermal Insulated Structure for Micro-Thermoelectric Gas Sensor |
L. F. Houlet, K. Tajima, W. Shin, T. Itoh, N. Izu, & I. Matsubara |
568 |
|
| Nano-gap Effects in Semiconductor Gas Sensors |
J. Tamaki, A. Miyaji, J. Niimi, Y. Nakataya, & S. Konishi |
573 |
|
|
| NOVEMBER 2006 Volume 126-A Number 11 |
| Title |
Author |
Page |
Extended Summary |
| Separation of Cells using a Fluidic MEMS Device and a Quantitative Analysis of Cell Movement |
T. Isoda & Y. Ishida |
583 |
|
| Examination Concerning Miniaturization of the Micro-Machine using the Magnetic Torque |
A. Yamazaki, M. Sendoh, K. Ishiyama, & K. Arai |
590 |
|
| Simulator for Measuring Elderly Driver's Visual Performances While Driving |
T. Nakano, M. Yamada, Y. Takagi, O. Yamamoto, & S. Yamamoto |
596 |
|
| Non-Photolithographic Manufacturing Processes for Micro-Channels Functioned by Micro-Contact-Printed SAMs |
H. Saigusa, Y. Suga, & N. Miki |
603 |
|
| A Micromachined Thermal Flow Sensor Applied to A PC Mouse Device |
S. Sasaki, T. Fujiwara, S. Nozoe, F. Sato, K. Imanaka, & S. Sugiyama |
607 |
|
| Development of Primary Calibration System for Vibration and Acceleration Standard in High Frequency Range with Laser Interferometer with Multifold Optical Path |
A. Oota, T. Usuda, H. Aoyama, & S. Sato |
612 |
|
| Detection of Aromatic Nitro Compounds Using Preconcentrator and SPR Immunosensor |
T. Onodera, K. Miyahara, M. Iwakura, K. Hayashi, N. Miura, K. Matsumoto, & K. Toko |
621 |
|
|
| DECEMBER 2006 Volume 126-A Number 12 |
| Title |
Author |
Page |
Extended Summary |
| Air Monitoring System in Elders' Apartment with QCM Type Gas Sensors |
M. Kikuchi, T. Ito, & S. Shiratori |
631 |
|
| Development of Micro Capacitive Inclination Sensor |
H. Ueda, H. Ueno, K. Itoigawa, & T. Hattori |
637 |
|
| High Temperature and High Sensitive NOx Gas Sensor with Hetero-Junction
Structure using Laser Ablation Method |
W. Gao, L. Shi, Y. Hasegawa, & T. Katsube |
643 |
|
| RF Characteristics of Through-Hole Interconnections Filled with Au-Sn Solder |
S. Yamamoto, K. Matsumaru, & T. Suemasu |
649 |
|
| Electric Properties of the ITO-ZnSe-CdTe-ZnTe Photo Sensor Cell |
T. Ichibakase |
655 |
|
| Development of Abnormality Detection System for Bathers using Ultrasonic
Sensors |
Y. Ohnishi, T. Abe, H. Nambo, H. Kimura, & Y. Ogoshi |
662 |
|
|
|
|
|
| Copyright (C) 2005 The Institute of Electrical Engineers of Japan. All
Rights Reserved |
|